You are here: Home arrow Product arrow Breathing Apparatus arrow Spasciani Breathing Apparatus

Peralatan Safety - Alat Safety

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
Jual Interspiro Spiromatic 90U Breathing Apparatus

Spasciani Breathing Apparatus
View Full-Size Image


Spasciani Breathing Apparatus



Ask a question about this product

BREATHING APPARATUS

Self Containing Breathing Apparatus

SELF CONTAINT BREATHING APPARATUS ( SCBA) :
Completer set:
Spesifikasi Breathing Apparatus YEAN
standard SOLAS 1974 - 2000 and GA124
Material Steel Grade cylinder
Operating Pressure 30Mpa - Gas Valve > 300L/ min
Pressure reducing Valve - Output Pressure - 0.65 + / - 0.2 Mpa
Operating Pressure of Middle-Pressure relief Valve
It is air tight when the outpur pressure is less than 0.85Mpa.It 1.0-1.2Mpa
Alarm pressure of Remaining gas Alarm - 5~ 6Mpa
Exhale Resistance ( 30L/ min) < 687 pa
Opening Pressure of gas Valve , 980 pa
Full face Mask, Backplate w/ harness, Lung Demand Valve,
Pressure Gauge Reducer Valve
Warning Whistle, Carrying Case

It is widely used in the field of fire-fighting, chemical industry , petroleum industry, shipping, laboratory mines and metallurgy, warehouses, etc.. Protecting fire fight from smoke fumes andtoxic gases. Providing respiratory protection from airborne workplace hazards. The productshas been both inspected and approved by the national quality testing center and the Register of Shipping " CCS " .The new model with smaller size , higher positive pressure , lower respiratory resistance , more convenient for maintenance contains the hand button and bypass assembly. When the switch of the cylinder valve is opened, you must close the air port ( push the hand button inwardly) This product provides user with a qualified air-tight face mask which possess wild mission . The air-supply set provides user with a new model of stable demand valve with the properties of smaller size and lighterweight. The backboard is made of qualified stress material. The cylinder containing high pressure of air possesses a proper safe parameter. The pressure reducing valve assembly provides an alarm, which whistles at certain range of air pressure to warn user to leave the dangerous area in time.

Specification
Breathing Apparatus Spasciani RN/ A 1303

RN/ A 1303 is a Self Contained Breathing Apparatus designed for short maintenance interventions in chemical plants and industrial areas or for escape from dangerous environments.

RN/ A 1303 adds on maximum safety and comfort the efficiency, versatility and simple use of the MK2 System, as well as the astonishing field of vision of the Spasciani TR 2002 A mask.

RN/ A 1303 is fitted with an automatic demand valve which keeps a positive pressure in the mask thus avoiding any possible inward leakage of contaminated air from the outside. Should it become necessary the positive pressure mode can be activated by acting on the special button that acts as a supplementary air command, too. The demand valve is connected to the medium pressure hose by means of a quick coupling which allows to disconnect it very easily for maintenance.

RN/ A 1303 takes advantage from the unique MK2 System warning built into the demand valve. This is activated when the pressure left in the cylinder drops below 70 bar. The signal originates from a sounding vibration caused by every inhalation. In this way the full capacity of cylinder is made available to the user for breathing. The acoustic warning is related to the respiratory frequency of the user and allows the user to distinguish his own signal from that emitted by nearby fellows or noise ( Self Test Function) . The location of the warning device protects it from frost or dirt.

The back plate is made of blow moulded polypropylene, it is extremely robust and anatomically shaped to allow a comfortable distribution of weight and remains steady on the wearer’ s back even when crouching or crawling. The supporting harness is provided with a special padding to increase comfort and can be equipped, on demand, with a soft belt in the hips area to increase portability of the equipment. Special handles integral with the backplate are provided for carrying the set along. The pressure reducer keeps the outlet pressure constant throughout the emptying of the cylinder and is connected to an easy to read phosphorescent gauge. The steel cylinder has a capacity of 3 liters with a pressure of 300 bar and is fitted with a valve to EN 144.

RN/ A 1303 can also be used in conjunction with a wheeled BA Spasciani RC or an air line feeding system by means of the optional 4-way valve.

Technical Data
Pressure Reducer: piston with compensator
Automatic Demand Valve: with integral alarm device and supplementary supply button
Setting of the Alarm: 70 5 bar
Volume/ pressure of Cylinder: 3 l/ 300 bar
Air reserve: 830 N litres
Duration: 27 min at an average consumption of 30 l/ min.
Classification and Marking
Certified Type 1 to EN137: 2006 and meeting with directives 98/ 686/ EEC ( PPE) and 97/ 23/ EC ( PED)
Materials
Mask: TR 2002 A

Outer face blank: EPDM
Panoramic Visor: scratch and solvent resistant polycarbonate
Inner Nose Cup: TPE
Five arm head harness: EPDM
Carrying strap: PVC

Backplate: thermoplastic polypropylene
Harness with padding: self-extinguishing webbing and elastomeric foam
Pressure reducer: brass alloy nickel plated
Automatic Demand Valve: fiber glass reinforced nylon housing
Cylinder: Steel.

Weight
11 Kg approx., set complete with mask and fully charged cylinder
Dimensions
310x570x210 mm, measured with set laying down on a flat surface.
The set is packed w/ o cylinder in a carton box dimensions 710x210x460 mm
Cylinder is packed into a carton box dimensions 710x150x160 mm

PERALATANSAFETY.COM